|
Ranor has some of the largest machinery of its kind in New England.
CAD/CAM enabled cutting capabilities are as follows:
- Up to 22 inches thick in carbon steel
- Airco 22" x 65" x 120"
- Up to 7 inches thick in stainless and non-ferrous metals
- MG Industries 8" x 198" x 576" 11" x 120" x 132"
Hydraulic shearing capabilities include:
- 1 inch thick by 20 feet wide for carbon steel
- 3/4 inch thick by 20 feet wide for stainless steel
Hydraulic press brakes capabilities include:
- 1500 ton with a 30 foot long bed can form up to 1 inch thick steel at full length
- 750 ton with a 20 foot long bed
- 400 ton with a 18 foot long bed
|
